DragON set for smokers - 2700W heating element with digital control unit and Browin regulator
Code: 2134Related products
Product detailed description
The Browin dragON 2700 W electric kit with digital regulator and fan is a practical solution for modernising a garden smokehouse and switching to more convenient electric heating. Thanks to the 2.7 kW heating module with forced air circulation, digital temperature control from 0–90 °C and a timer for up to 4 hours, it allows for better control of conditions during smoking, drying, and baking of food. According to the manufacturer, the kit is suitable for smoking chambers with a volume of up to 500 litres and can be installed in suitable wooden, steel, or masonry smokehouses with wall thicknesses of 1.5–15 cm. The system also includes a safety temperature protection that disconnects the heating power if 110 °C is exceeded.
Main advantages of the Browin dragON 2700 W electric kit
-
Heating power 2,700 W – powerful electric heating even for more spacious smoking chambers
-
For smokehouses up to 500 l – according to manufacturer's recommendations
-
Fan with forced air circulation – helps distribute heat throughout the smoking chamber
-
Digital temperature regulation 0–90 °C – convenient setting and monitoring of the current temperature
-
Timer 0–4 hours – option to set the length of heating operation
-
Two heating modes – time-controlled and continuous operation
-
Independent fan control – option to turn air circulation on or off
-
Safety thermal fuse 110 °C – protection against dangerous overheating
-
Three mutually compatible modules – heating with fan, digital control and temperature protection
-
Suitable for various smoking methods – cold, warm and hot smoking, drying or baking
-
Compatibility with walls 1.5–15 cm – for structurally suitable wooden, metal and masonry smokehouses
-
Option to connect a dragON Jet smoke generator – extending the assembly with independent smoke production
-
Mounting templates and accessories included – facilitate the correct positioning of individual modules
What's in the package
-
Browin dragON 2700 W heating module with integrated fan and connection cable – 1 pc
-
Digital control module with display, temperature regulation, timer and control switches – 1 pc
-
Temperature sensor and thermal protection module – 1 pc
-
Power cable – 1 pc
-
Cable holders – 4 pcs
-
Black mounting screws 4.2 × 13 mm – 4 pcs
-
Wood screws 3.5 × 20 mm – 8 pcs
-
Wood screws 3.5 × 12 mm – 8 pcs
-
Heating module mounting template – 1 pc
-
Control module mounting template – 1 pc
-
Installation and user manual – 1 pc
Note: The kit includes electric heating, a fan, digital regulation, and safety elements. Smoke generator, smoking chamber, and wood chips are not included in the package. To produce smoke, a suitable separate generator must be used.
Powerful 2700 W electric heating for smokers up to 500 l
The basis of the Browin dragON set is an electric heating module with a power input of 2,700 W, which ensures heating of the smoking chamber without the need to add wood to a traditional firebox. The manufacturer recommends it for garden smokers with a volume of up to 500 litres, allowing for use in larger wooden, steel, or masonry structures. However, the actual heating speed and the ability to maintain the required temperature depend on the volume and insulation of the chamber, outdoor conditions, and the amount of food being prepared.
Compared to a traditional wood-fired firebox, electric heating allows for more convenient temperature regulation. Once the desired value is set, the control unit automatically manages the heating element based on data from the temperature sensor. Thanks to this, there is no need to manually add fuel to maintain the temperature in the smoker.
Integrated fan for more even heat distribution
One of the biggest advantages of the kit is the heating module with an integrated fan, which creates forced air circulation inside the smoking chamber. This principle, also known as thermal convection, helps distribute heat from the heating element to other parts of the smoker and reduces significant temperature differences between different areas.
The fan is particularly useful in more spacious smoking chambers, where uneven temperature distribution can occur without active airflow. Better circulation helps food heat more evenly and can also make the drying process before smoking more efficient.
The fan is part of the heating module and is used for air circulation. It is not a smoke generator or the air blower motor of a smoke generator.
Digital Browin control unit
The entire system is operated using the Browin digital control unit, which allows for the setting and monitoring of the smoker's operating parameters. The display shows the current temperature measured by the sensor and the desired set temperature. This gives you an overview of the heating process and allows you to adjust the settings to the specific preparation method.
The unit includes a microprocessor regulator, a timer, a heating mode switch, a separate fan switch, and a main power switch. This removes the need for several separate devices and allows basic functions to be controlled from a single panel.
Temperature regulation from 0–90 °C
The digital regulator allows you to set the temperature between 0 and 90 °C. The temperature sensor continuously monitors the conditions in the smoking chamber, and the control unit operates the electric heating element based on the set value. This system makes it easier to maintain the desired conditions for smoking, drying, and slow-roasting food.
The regulation option is particularly useful when preparing sausages, fish, meat, or bacon, where it is important to adapt the temperature to a specific recipe. The accuracy and uniformity of the temperature throughout the chamber are always influenced by its construction, the placement of food, and the airflow.
The maximum adjustable temperature is 90 °C. The value of 110 °C represents only the limit of the safety thermal protection and is not intended as an operational setting.
Timer up to 4 hours
A practical feature of the digital control unit is the timer with a range of 0–4 hours, which allows you to limit the operating time of the heating element. The time is set using a rotary controller, and according to the manufacturer's manual, the scale is divided into 30-minute intervals.
In timed mode, the heating switches off after the set time has elapsed. You can use this function, for example, when drying food or during individual smoking phases where you wish to work with a predetermined heating time.
The timer controls the electric heating. It is not a device that automatically monitors food readiness or replaces continuous supervision of the smoker's safe operation.
Timed and continuous heating
Browin dragON offers two heating element operating modes, which can be switched directly on the control unit. In timed mode, heating is controlled by the time set on the timer. In continuous heating mode, the heating element can operate without timer restrictions, though still according to the required temperature and the system's safety features.
This option is particularly practical for longer processes where the heating method needs to be adapted to a specific recipe. For example, if you are preparing larger cuts of meat, you can use temperature-controlled operation, while the timer is suitable for a time-limited drying phase.
The manufacturer specifies a special restriction: operation at the maximum temperature of 90 °C without air circulation enabled is permitted for a maximum of 4 hours.
Independent fan control
The control panel also includes an independent fan switch, allowing you to activate or deactivate forced air circulation regardless of the timer setting. This allows you to adapt the airflow to the specific stage of food preparation.
The fan is suitable, for example, for drying the surface of meat before smoking or for heating a larger smoking chamber where more uniform heat distribution is desirable. Operation without the fan is only possible under conditions specified by the manufacturer, and it is essential to respect the limitations at maximum temperature in particular.
Safety thermal protection at 110 °C
An important part of the assembly is the KSD301 safety thermal protection with a limit of 110 °C, which complements the standard temperature regulation. If the temperature rises dangerously above the set value, the safety element disconnects the heating power supply.
This protection helps limit the risks associated with overheating the smoking chamber, especially when using the equipment in a wooden construction. However, it must be emphasised that the safety fuse does not replace proper installation or adherence to operating instructions.
During normal use, the temperature is set to a maximum of 90 °C. If the thermal protection is triggered, it is necessary to determine the cause of overheating and follow the manufacturer's instructions before further operation.
Suitable for wooden, steel, and masonry smokers
According to the manufacturer, the Browin dragON 2700 W electric kit is intended for garden smokers with walls 1.5–15 cm thick. Thanks to its modular design, it can be installed in suitable wooden, steel, or masonry smoking chambers, provided their construction allows for the secure mounting of individual modules.
The kit is practical for building a new electric smoker as well as for modernising an existing device. Before installation, however, it is necessary to verify the available space, wall thickness, construction material, and requirements for a safe electrical connection.
Wall thickness alone does not guarantee compatibility. It is necessary to assess the entire technical design of the smoker and the possibility of safely placing the heating module, control unit, and temperature sensors.
Installation using the included templates
The package includes mounting templates for the heating module and digital control unit, which facilitate the preparation of openings and the correct positioning of individual parts. According to the instructions, the heating module is installed in the lower part of the back wall of the smoking chamber. The heating opening must be located at least 70 mm above the bottom edge of the chamber.
The digital control unit and the temperature sensor module with thermal protection are then attached. Individual elements are connected using the supplied cables and connectors. When positioning the regulator, it is necessary to check the length of the connection cable in advance to ensure both modules can be correctly connected.
The manufacturer recommends that installation be carried out by two people, especially when mounting the control unit. For metal and masonry smokehouses, it may be necessary to use other suitable fasteners than the included wood screws.
Cold, warm and hot smoking
The dragON kit expands the smokehouse's capabilities for various food processing methods, especially if supplemented with a separate smoke generator. According to the manufacturer, the system can be used for cold, warm and hot smoking, drying or roasting foods.
Approximate temperatures provided by the manufacturer:
| Preparation method | Approximate temperature |
|---|---|
| Drying without smoke | Approximately 60 °C |
| Cold smoking | 16–25 °C |
| Warm smoking | 30–55 °C |
| Hot smoking | 55–65 °C |
| Roasting | 70–85 °C |
The temperatures listed are approximate and must be adapted to the specific foods and the chosen process. The kit itself generates heat and airflow, not smoke. For actual smoking, the smokehouse must be equipped with a corresponding smoke source.
During cold smoking, it may be further necessary to ensure a sufficiently low temperature in the smoking chamber, especially during warm weather. The heating unit does not lower the ambient temperature on its own.
Option to connect a Browin dragON Jet smoke generator
The Browin dragON electrical kit is ready for cooperation with compatible smoke generators from the dragON Jet series. The control unit has a connection designed to power the smoke generator's blower motor, allowing the operation of the electric heating and the smoke-generating system to be synchronised.
Once the generator is added, it creates a system where the heating module ensures the temperature, the fan supports air circulation, and the generator creates smoke from wood chips. Each part thus performs a different function, and together they allow for more convenient preparation of smoked delicacies.
The dragON Jet smoke generator must be purchased separately. Connecting other electrical appliances to the socket intended for the generator motor is prohibited by the manufacturer.
Drying food before smoking
The electric heating module with a fan is also practical for drying meat, sausages, or other foods before the smoking process itself. In this phase, it is not necessary to produce smoke, as the primary goal is to prepare the surface of the ingredients.
Thanks to the forced air circulation, drying can be more uniform than in a chamber without active airflow. The temperature and duration must always be chosen based on the type of food, its preparation, and the recommended technical procedure.
First use and burn-in of the heating module
Before the first smoking, the manufacturer recommends performing an initial burn-in of the heating module for approximately 30 minutes to remove any production residues. This process must be carried out outdoors, not in an enclosed room.
According to the instructions, during burn-in, the temperature is set to 90 °C, the timer to 30 minutes, and the fan is switched on. After completion, the device must be allowed to cool down. The burn-in is performed without food and without generating smoke.
The kit can only be used for food preparation after correct installation, functionality check, and completion of the initial burn-in.
Safe electrical connection
The Browin dragON 2700 W kit is designed for 230 V / 50 Hz power supply. The manufacturer requires connection to a suitable grounded electrical socket and recommends the use of a residual current device (RCD). Given the power of the heating element, it is important to ensure appropriate fusing and safe routing of the power cable.
Electrical components must not be exposed to rain, snow, or excessive humidity. An IP31 protection rating does not mean that the device can be left unprotected in the rain. Installation must comply with the manufacturer's requirements and applicable safety regulations.
Electrical repairs and interventions in the wiring may only be carried out by qualified persons. Before any maintenance or cleaning, it is necessary to disconnect the device from the power supply and allow the heating module to cool down completely.
For outdoor use under a shelter only
The manufacturer stipulates that a smoker equipped with the dragON kit must be operated outdoors under a suitable shelter that protects electrical components from rain, snow, and other adverse weather conditions. The base must be solid, level, stable and non-flammable.
During operation, the heating element and its surroundings can reach high temperatures. When handling, use suitable protective gloves and maintain a safe distance from flammable objects. The device is not intended for use in enclosed residential spaces.
Never leave a smokehouse equipped with electrical modules unattended during operation. Automatic temperature regulation and the safety fuse reduce the need for manual operation, but they do not replace supervision of the entire process.
Cleaning and regular maintenance
To maintain proper function, it is important to regularly clean especially the temperature sensor and the safety thermal fuse. The manufacturer recommends cleaning these parts after every use to prevent smoke and grease deposits from hindering their function.
After the device has cooled completely and been disconnected from the mains, remove debris from accessible parts of the heating module and check the condition of the connection cables, connectors and the fan. Do not use unsuitable aggressive cleaning agents or a direct stream of water on electrical components during cleaning.
Regular inspection is particularly important with frequent smoking, as grease and tar deposits build up inside the smokehouse.
Who is the Browin dragON 2700 W kit suitable for?
We recommend the kit to customers who wish to modernise their existing garden smokehouse and achieve more convenient temperature control without the need to manually add wood to the firebox. Thanks to its 2.7 kW power, it is also suitable for larger smoking chambers, especially those with appropriate construction and thermal insulation.
It will be appreciated by home smokers who regularly prepare sausages, bacon, pork collar, fish or other specialties and wish to utilise digital regulation, a timer and forced air circulation.
What do we recommend buying?
For complete electric smoking, we recommend complementing the kit with a compatible Browin dragON Jet smoke generator, which enables independent smoke production from wood chips. High-quality wood chips, a probe thermometer to check the internal temperature of the meat and a suitable drip tray are also useful.
Further equipment can be found in the smokehouse accessories category, available generators in the smoke generators category and fuel in the range of wood chips for smoking.
Frequently Asked Questions
What is the power output of the Browin dragON electric kit?
The heating element has a rated power input of 2,700 W, i.e. 2.7 kW.
For what size of smokehouse is the kit suitable?
The manufacturer recommends use in smokehouses with a volume of up to 500 litres. Actual efficiency depends on construction, insulation and operating conditions.
Is the fan included in the package?
Yes. The fan is integrated directly into the heating module and ensures forced air circulation inside the smoking chamber.
What temperature can I set?
The digital regulator allows you to set the temperature in the range of 0–90 °C.
What is the purpose of the 110 °C safety protection?
It is a thermal fuse that disconnects the heating power supply in the event of dangerous overheating. The value of 110 °C is not a standard adjustable operating temperature.
Can the heating time be set?
Yes. The timer allows you to set the heating operation time in the range of 0–4 hours. The kit also offers a continuous mode without timer restrictions.
Can the fan be turned off?
Yes. The fan has a separate on/off switch. However, when operating without forced circulation, it is necessary to observe the safety restrictions specified by the manufacturer.
Is the smoke generator included in the kit?
No. The kit includes electric heating, a fan, a digital regulator, and temperature protection. The smoke generator must be purchased separately.
Can I connect a Browin dragON Jet generator?
Yes. The system allows the connection of a compatible blower motor from a dragON Jet smoke generator to the designated socket on the control unit.
Can the kit be installed in a wooden smokehouse?
Yes, provided it has a suitable construction, appropriate wall thickness, and allows for safe installation according to the manual. The manufacturer states compatibility with walls with a thickness of 1.5–15 cm.
Is the kit suitable for cold smoking?
Yes, in combination with an appropriate smoke generator and by ensuring the required low temperature. The heating module itself does not provide cooling for the smoking chamber.
Can the kit be used in the rain?
No, not without appropriate protection. The manufacturer requires outdoor use under a shelter and the protection of electrical components from weather effects.
Browin dragON 2700 W – modern electric smoker heating with digital regulation
The Browin dragON 2700 W set allows you to equip your garden smoker with powerful electric heating, a forced-air circulation fan and digital temperature regulation. With a setting range of 0–90 °C, a timer for up to 4 hours and thermal safety protection, it represents a practical solution for customers who want better control over smoking, drying and baking food.
In combination with a compatible smoke generator, you can create an electric smoker where heating and smoke production are managed independently.
Also explore our range of garden smokers, smoke generators and other smoker accessories.
We are a family business from Opava and we will be happy to advise you on choosing a smoker, heating system and suitable accessories. You can also visit us at our brick-and-mortar store, where we have our best-selling smokers and selected grills on display. If you would like to see a specific model, we recommend checking whether we have it on display before your visit. Further information can be found in the Contacts section.
Additional parameters
| Category: | Smoke Generators and Smoke Boxes |
|---|---|
| Weight: | 7.5 kg |
| EAN: | 5904816025033 |
| Device type: | Electric curing room heater with digital control |
| Power input: | 2,700 W (2.7 kW) |
| Power supply: | 230 V / 50 Hz |
| Recommended sump volume: | Up to 500 l |
| Wall thickness of the chamber: | 1.5–15 cm |
| Temperature setting range: | 0–90 °C |
| Timer: | 0–4 hours |
| Heating modes: | Time / Elapsed |
| Fan: | Yes – forced air circulation |
| Heat protection: | 110 °C |
| Protection rating: | IP31 |
| Smoke generator included in the package: | No |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!