Electric distillation apparatus POT-STILL - KEG 50L - Edest

Product detailed description

The Edest POT-STILL KEG 50 l electric still is a complete distillation set featuring electric heating, a column, water cooling, and temperature monitoring accessories. The foundation is a 50-litre KEG tank, supplemented by two electric heating elements with power ratings of 1,500 W and 2,000 W. The set also includes a distillation column with a diameter of 60.3 mm, two separators with drain valves, and a condenser with a three-metre coil. The device is intended for distillation processes in accordance with applicable legal regulations and requires an appropriate electrical connection, a cooling water supply, and professionally correct operation.

Key advantages of the Edest distillation unit

• 50 l KEG tank – a spacious base for the distillation set

• 1,500 W and 2,000 W electric heating coils – total rated power of 3.5 kW

• POT-STILL distillation column (60.3 mm diameter) – part of the equipment for separating volatile components

• Two large separators with drain valves – accessible parts of the assembly for collecting condensate

• Water-cooled condenser – 3 m long cooling coil

• Two thermometers – electronic and bimetallic for temperature control

• Complete connection accessories – hoses, quick connector, seals, and fastening clamps

What's in the package

• 50 l KEG tank with a welded neck and preparation for a thermometer, drain valve, and electric heating

• POT-STILL distillation column with a diameter of 60.3 mm

• 1,500 W electric heating element

• 2,000 W electric heating element

• 2 large separators with drain valves

• 60.3 mm diameter condenser with 3 m internal cooling coil

• Electronic thermometer

• Bimetallic thermometer with rear connection

• Hoses for cooling water supply and drainage

• Silicone seals

• Fastening clamps

• Quick connector for cooling connection

• Distillation column packing

• Ball drain valve

• Assembly and operating instructions

50-litre KEG tank

The basis of the entire set is a 50-litre KEG tank, which forms the lower part of the distillation equipment.

The tank is equipped with a welded neck for connecting the distillation column, a preparation for the thermometer, and connection ports for electric heating and liquid drainage.

Thanks to the bottom drain valve, the tank can be emptied more conveniently after operation and once it has cooled down safely.

The 50-litre volume represents the total capacity of the tank, not the recommended maximum operating fill level. When using, it is necessary to adhere to the minimum and maximum levels specified by the manufacturer.

Electric heating with two heating elements

The set includes two electric heating elements with rated powers of 1,500 W and 2,000 W.

Their total rated power is 3,500 W (3.5 kW).

Electric heating allows operation without an external gas burner or open fire.

Before connecting, it is essential to check whether the electrical installation, power circuit, fusing, and connection accessories meet the requirements of the supplied heating elements.

Heating coils must not be used dry. The electrical connection and method of use must always comply with the manufacturer's instructions.

POT-STILL distillation column

The equipment includes a POT-STILL distillation column with a diameter of 60.3 mm, which connects to the upper neck of the tank.

The column creates a space for directing the generated vapours towards the separators and the cooling section of the set.

The device is also equipped with column packing, which must be correctly installed according to the documentation of the specific version.

Individual joints use suitable seals and fasteners, which are important for the correct assembly of the device.

Two separators with drain valves

The distillation set includes two large separators equipped with welded necks and independent drain valves.

The separators are separate parts of the distillation system where liquid components can be captured.

The drain valves allow access to the contents of these parts according to the procedure prescribed by the manufacturer.

When handling, it is necessary to be aware of the high temperature of the equipment and always follow the operating and safety instructions.

Water-cooled condenser with a three-metre coil

To cool the vapours, the device is equipped with a water-cooled condenser.

The condenser body consists of a pipe with a diameter of 60.3 mm, containing a coil made of tubing with dimensions of 8 × 1 mm and a length of 3 m.

The cooling system is equipped with connections for water supply and drainage. The set also includes hoses and a quick connector for connection to a suitable cooling water source.

Proper cooling function is essential for the safe operation of the still. Before each use, it is necessary to verify the tightness of the joints, the patency of the lines, and the proper function of the cooling circuit.

Electronic and bimetallic thermometers

The equipment includes two thermometers, which allow for temperature monitoring in different parts of the assembly.

• Electronic thermometer – designed for temperature measurement using the appropriate probe

• Bimetallic thermometer – mechanical temperature measurement in the designated measuring point

Both the tank and the distillation column have designated points for installing temperature sensors or thermometers.

Continuous temperature monitoring is an important part of controlling the distillation process, but it does not replace correct assembly, functional cooling, or other safety measures.

Design and assembly of the device

The Edest still consists of several main parts that must be correctly connected and sealed before use.

The basis is the KEG tank, to which the distillation column is attached. These are followed by the separators, cooler, temperature sensors, and cooling water lines.

For correct assembly, the package also includes silicone seals, clamps, and connecting accessories.

The device must be placed on a level, firm, and stable surface with sufficient space for safe handling.

Before putting the device into operation, it is necessary to check all connections and follow the provided manual for the specific version of the equipment.

First use and regular maintenance

Before first use, all parts of the equipment must be checked, correctly assembled, and cleaned according to the instructions.

Pay special attention to the seals, drain valves, heating elements, and the cooling water connection.

After operation, disconnect the power supply and allow the device to cool down completely before disassembly.

Regular maintenance mainly includes:

• Cleaning the tank and the drain valve

• Checking and cleaning the distillation column and its packing

• Flushing the cooling system according to the manufacturer's instructions

• Checking the seals, clamps, and joints

• Checking the condition of the electric heating elements and power cables

Never clean electrical parts while they are energised, and never immerse them in water.

Safe use of the electric distillation apparatus

The electric distillation apparatus combines high electrical power input, heated liquid, and a vapour conduction and cooling system. For this reason, it requires professionally correct installation and responsible operation.

In particular, observe the following principles:

• Use the equipment only for purposes permitted by applicable legal regulations

• Place the apparatus on a flat, stable, and suitable surface

• Before use, check the correct assembly and tightness of all connections

• Verify the safe connection of the electrical heating elements

• Ensure the correct functioning of the cooling system

• Do not exceed the operating limits specified in the manual

• Do not allow the heating elements to operate without a sufficient quantity of liquid

• Never block the vapour outlet nor use the equipment as a closed pressure vessel

• Do not leave the equipment unattended during operation

• Do not perform disassembly or cleaning before the unit has cooled down completely

If you have any doubts regarding the electrical connection or safe installation, please contact a qualified professional.

Legislative notice regarding distillation apparatuses

In the Czech Republic, the home production of spirit and alcoholic distillates is not permitted without the appropriate authorisation, even for personal consumption.

The production of alcohol is subject to Act No. 61/1997 Coll., on Spirit, as amended, and related legal regulations.

Distillation apparatuses may also be used for other distillation activities, such as water distillation, provided the specific equipment is suitable for the purpose and all relevant technical and legal requirements are met.

The sale and relocation of equipment intended for the production or processing of spirit are subject to a statutory notification obligation.

More detailed information can be found on our page Legislation for home distilleries.

What do we recommend buying?

Browse our range of distiller accessories, where you will find further equipment for the maintenance and expansion of distillation sets.

When selecting accessories, it is important to verify compatibility with the specific type of tank, column, and connection method.

Other models with different capacities and heating methods can be found in the Edest distillation apparatuses category.

Frequently Asked Questions

What is the capacity of the Edest POT-STILL KEG still?

The device has a tank with a total capacity of 50 litres. The operating volume of the liquid must comply with the conditions stated in the manual.

How is the device heated?

According to the specifications of the kit, it includes two electric heating elements with power ratings of 1,500 W and 2,000 W. Their total rated power is 3.5 kW.

Is a connection to the mains electricity required?

Yes. Electrical energy is used to heat the tank. The method of connection must meet the requirements of the supplied heating elements and the electrical installation.

Is a condenser also included?

Yes. The kit includes a water-cooled condenser with an internal coil 3 metres in length.

How many thermometers are included in the package?

The kit includes one electronic and one bimetallic thermometer.

Are separators also part of the device?

Yes. The package contains two separators with separate drain valves.

Is it possible to legally produce alcohol at home using this device?

In the Czech Republic, it is not permitted to produce alcoholic distillates, even for personal consumption, without the appropriate authorisation. The use of the equipment must always comply with applicable legal regulations.

Can the device be cleaned immediately after use?

No. Before disassembly and cleaning, the power supply must be disconnected and the device must be allowed to cool down completely.

We can help you choose the right still

Edest POT-STILL KEG 50 l electric still offers a complete set with electric heating, a distillation column, separators and water cooling.

If you need advice on choosing a specific model, device dimensions or compatible accessories, we are happy to help.

We are a family business from Opava offering various types of distillation apparatus and related equipment.

You can also visit us in person at our brick-and-mortar store. If you would like to see a specific model, we recommend verifying by telephone in advance whether we have it on display.

Further information can be found in the Contacts section.